Outline of simulation mode
There is a protocol mode for SECS-I and for HSMS.
The protocol mode for SECS-I includes the single block mode and the multi block mode.
In the single block mode, the sending and receiving of handshake code (ENQ/EOT/ACK/NAK) and the confirmation of the status change can be done.
As for all the handshake code, data, the thing sent according to arbitrary timing is possible.
In the multi block mode, the first block, the block on the way, the correspondence confirmation of the final block, and the time-out between blocks are confirmed.
In the protocol mode for HSMS, the Connect/DisConnect confirmation at the TCP/IP level and the confirmation of the control sending and receiving message and the status change such as Select.Req/LinkTest.req can be done.
As for the control message and all data, the thing sent according to arbitrary timing is possible.
In the multi block mode, the first block, the block on the way, the correspondence confirmation of the final block, and the time-out between blocks are confirmed.
The message mode confirms the cable in each message.
In the first Semi Auto Mode, it is possible to transmit by stopping temporarily when the message is received, and selecting the second message.
In the first Auto Mode, when the message is received or the responding second message is one, the second message is automatically sent back. Moreover, the thing that displays, selects the list when two or more second messages are defined, and transmits is possible. Each message is described with LTScript.
In the message mode, the submode includes the following modes.
An always arbitrary message can be transmitted by the operator's specification in the Manual Mode.- Manual Mode
- Semi Auto Mode
- Auto Mode
In the first Semi Auto Mode, it is possible to transmit by stopping temporarily when the message is received, and selecting the second message.
In the first Auto Mode, when the message is received or the responding second message is one, the second message is automatically sent back. Moreover, the thing that displays, selects the list when two or more second messages are defined, and transmits is possible. Each message is described with LTScript.
The scenario mode describes the scenario of the communication with LTGem Script(LTScript) as well as the LTGem server.
LTScript consists of each definition of each variable/constant (V), SECS message (Message), scenario (Talk), event (Event), collection event (CEID), report (RPTID), and alarm (ALARM).
These definitions are done with the message definition tool, and operate by the interpreter form.
The thing simulated as taking the place of the device is possible when connecting it with the host as host's taking the place when connecting it with the device.